instructions. White LED Ring On/Off and Momentary Switches for other applications are also available.                                                  #L75W - HotDot (with White LED Ring)      - $130.00

Billet Face Plate for our

L75 series switches 

A great way to mount our L75 series switches - put an

Ignition switch and an Accessory switch side-by-side.

The plate is 1” wide x 2” long and secures with the switch

nuts. L75 switches sold separately.

#L75FP-2 - Billet Face Plate for our L75 series switches      - $15.00

We can do all kinds of switching with these bad boys - give us a call for ideas.

Billet Electric

Firewall Plug

An attractive and convenient alternative to firewall ports, this Electric Plug allows you to connect/disconnect your front end or other wiring. Electrical work is easier during construction, modification or trouble shooting/repair. Once installed, the plug screws together for a secure connection. Has 8 circuits, each with 16 ga. wire, GM color coded.  10 amp rating per circuit. 3/16” maximum firewall thickness. Gasket included.

The parts: male & female electrical plugs with preinstalled 16 ga., 24” wire leads, billet support frame, billet plug cover, hardware, connectors and gasket.

Plug cover, installed,  is 2” tall x 1-1/2” wide x 7/8” deep. Clean wire exit flush to the surface.

Bullet Beehive

LED Taillights w/ Billet Base

‘50’s styling with 21st century technology. Each light has 13 Super Bright Red LED’s in a Beehive light that has a neat star pattern. Machined Billet Base provides a high-tech finishing touch. Easily mounted to a flat surface using the hardware provided - only three holes needed to install. Dual intensity convertor included. Overall dimensions are 2-3/4” diameter x 2-7/8” tall. Use as a pair or in groups of four or six for that classic taillight look.

#L84R - Bullet Beehive

LED Taillights w/ Billet Base  - $89.00 (pair)

Amber, too!  Bullet Beehive LED

Park Lights w/ Billet Base   The perfect match to our Beehive Taillights. Each light has 13 Super Bright Amber LED’s in a Beehive light that has a neat star pattern. May be used as the rear turn signal for vehicles that have separate turn signals.      

#L84A - Bullet Beehive LED Park Lights w/ Billet Base  - $89.00 (pair)

HotDot All-in-one        

Ignition/Start/Stop Switch with White LED Ign. Indicator Ring

Our extremely popular HotDot All-in-one Ignition/Start/ Stop Switch - now with a white Ignition Indicator LED ring. Push and hold the button while the starter turns over and release when the engine starts. The ignition stays “On”. Push again to stop the engine. Chrome finish switch, relays and

Double-D LED Taillights

Double-D taillights with twice the diodes. Two

strips of 60 Super Bright Red LED’s per light,

inside an aluminum housing. 1/4” thick build-in,

flush mounted red acrylic lenses with prismatic

diffusers. Each strip is split 40-20 and the strips

are wired separately so that you may wire the strips

together or not. Work with integral turn/brake

systems or vehicles with separate turn signals.

The lenses are 1/2” wide x 15-1/4” long.

Mounting hardware and dual intensity convertors included.

#L58-DDR - Double-D LED Taillights                                 - $260.00 (pair)

Also available with clear lenses with diffusers. #L58-DDCL        - $260.00 (pair)

Small Double-D LED Taillights

Two strips of 30 Super Bright Red LED’s per light, inside an aluminum housing. 1/4” thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 20-10 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2” wide x 7-1/2” long. Mounting hardware and dual intensity convertors included.

#L58SM-DDR -

Small Double-D LED Taillights - $190.00 (pair)

Or with clear lenses/diffusers.

#L58SM-DDCL                                  - $190.00 (pair)

Small LED Taillights with

separate Amber Turn Signals

For vehicles that have the turn signals separate from

the brake light. Each light has 20 Super Bright Red

LED’s that handle the taillight and brake light

functions, plus 4 Super Bright Amber LED’s for the turn signals - all inside an aluminum housing. 1/4” thick build-in, flush mounted clear acrylic lenses with prismatic diffusers. The lenses are 1/2” wide x 7-1/2” long. Mounting hardware and dual intensity convertors included.

#L58SM-RACL - Small LED Taillights with separate amber turn signals  - $150.00 (pair)

HotSlot Bright White

LED Running Lights

A step into 21st century styling. Three Super Bright White LED’s per light inside an aluminum housing. 1/2” thick build-in, flush mounted clear acrylic lenses are 1/2” wide x 1-3/4” long. Mounting hardware included.

#L63BW-3 - HotSlot Bright White

LED Running Lights                      - $140.00 (pr)

HotSlot Bright White

LED Backup Lights

Be able to see when you back up and be stylish, too.

Five Super Bright White LED’s per light inside an aluminum housing. 1/2” thick build-in, flush mounted clear acrylic lenses are 1/2” wide x 1-3/4” long.

Mounting hardware included.

#L63BW-5 - HotSlot Bright White

LED Backup Lights                     - $180.00 (pr)

Billet Face Plates for our L66 series LED indicators

An attractive way to mount our L66 series chrome bezel LED’s. Both plates are 1” wide with either 2 or 3 holes for common indicator applications. They are secured by 2 blind mounting studs with hardware included. L66 LED’s sold separately.

#L66FP-2, 2-hole Face Plate (1” x 2-1/4”)               -  $14.00

#L66FP-3, 3-hole Face Plate (1” x 3-3/16”)                   -  $15.00

LED Stop/Tail/Turn Light - SAE/DOT Compliant

A true surface mount LED taillight or 3rd brake light. The unit measures 1-3/16 wide” x 15-3/8” long and stands 11/16” tall off the surface. 10 Super Bright LED’s are wired for all three functions to use as a taillight (2 required) or it can be used as a 3rd brake light only. This light meets all SAE/DOT requirements. Black stainless steel mounting screws included.

#L87 - LED Stop/Tail/Turn Light  - $50.00 (each)

3-LED Interior and

Marker Lights

These bright little 3-LED lights have a variety of uses. They are 1” diameter overall and mount into a 3/4” diameter hole. Reds and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.

#L86RR,  Red LEDs/Red Lens   - $14.00,        #L86RCL,  Red LEDs/Clear Lens   - $14.00

#L86YY,  Amber LEDs/Amber Lens   - $14.00 

#L86YCL,  Amber LEDs/Clear Lens   - $14.00

#L86BCL,  Blue LEDs/Clear Lens   - $18.00 (blue is not legal for exterior use)

#L86WCL,  White LEDs/Clear Lens   - $18.00

LED Interior Light with Switch

A sweet little LED Interior Light. The lens measures just

7/8” x 3” and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16” x 5”) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4” rear clearance. Screws included.

#L85 - LED Interior Light with Switch  - $30.00

#B24 - Billet Electric Firewall Plug  - $89.00

Electronic Flasher for LED’s

A direct plug-in to your 2-prong flasher panel socket. This solid-state (electronic) flasher works for loads from as-little-as 20 ma up to a heavy duty 25 amps maximum load. 1-1/8” square X 1-9/16” tall.

#AM-02R - Electronic Flasher for LED’s    - $25.00

Cast Aluminum Key FOB’s

The heck with those silly bumper stickers that say, “My other car is a blah-blah-blah.” Who cares?!?!?! Let’s show ‘em what you drive with your vehicle’s year clearly stated. All are as-cast and can be finished or polished by you if desired. The number FOB’s are each about 1” tall by 1-1/4” wide. Or maybe you’re a flames kind of owner? Then get the flame FOB - it’s about 1” wide X 2-5/8” long.

#F-32/33/34/37/40/FL -    each   -    $10.00

TM

#L88 - Hot Dot Ignition Link   - $25.00