3 and 4 Switch

Billet Face Plate for Our

L75 Series Switches 

A great way to mount our L75 series switches.

The 3-switch plate is 1” wide x 3” long and the

4-switch plate is 1” wide x 4” long. They secure with the switch nuts. L75 switches sold separately.

#L75FP-2      (2-switch face plate)  - $15.00

#L75FP-3      (3-switch face plate)  - $17.00

#L75FP-4      (4-switch face plate)  - $19.00

We can do all kinds of switching with these bad boys - give us a call for ideas.

Double-D LED Taillights with Bright White Backup Lights

Double-D taillights with twice the diodes. Two strips of 50 Super Bright Red LED’s per light plus 3-(3) LED Bright White clusters for backup lights all inside an aluminum housing. 1/4” thick build-in, flush mounted clear acrylic lenses with prismatic diffuser. Each red strip is split 30-20 and the strips are wired separately so that you may wire the strips together or not. Works with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2” wide x 15-1/4” long. Mounting hardware and dual intensity convertors included.

#L58-DD-BU                                                                                     - $375.00 (pair)

LED Stop/Tail/Turn Light w/Billet End Cap Mounts

And it’s SAE/DOT compliant!

We’ve made this light easy to mount and great looking, too. Billet End Caps provide hidden surface mounting. The unit measures 1-3/8” wide x 15-9/16” long and stands 3/4” tall off the surface. 10 Super Bright LED’s are wired for all three functions to use as a taillight (2 required) or it can be used as a 3rd brake light only. This light meets all SAE/DOT requirements.

#L87-BEC  - LED Stop/Tail/Turn Light with Billet End Caps                      - $95.00 (each)

6-LED Interior and

Marker Lights

Great little 6-LED lights have a variety of uses. They are 1-13/16” diameter overall and mount into a 1-1/4” diameter hole. Reds and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.

#L96RR,  Red LEDs/Red Lens   - $20.00,        #L96RCL,  Red LEDs/Clear Lens   - $20.00

#L96YY,  Amber LEDs/Amber Lens   - $20.00 

#L96YCL,  Amber LEDs/Clear Lens   - $20.00

#L96BCL,  Blue LEDs/Clear Lens   - $24.00 (blue is not legal for exterior use)

#L96WCL,  White LEDs/Clear Lens   - $24.00

Billet Skull Decoration

Alas, poor Yorick, we knew him well. Even Hamlet loved a good skull and with the help of O’Brien Truckers we’ve made it easy for you to use one as a decorative piece almost anywhere on your ride. 1-3/4” tall X 3/4” wide and 1” deep. We provide a 1/4-20 mounting stud and hardware. Just figure out where you want ol’ Yorick and he’ll be there to keep you company for a long, long time.

#OB-SK                                                          -  $20.00

TM

Illuminated Billet 5-wire

Power Window Switch kits

with Grooved Switches

A design addition to our very popular line of Power Window Switch kits - we’ve added a grooved design and more lighting holes - all for the same price.

Rectangular Frames:

#L39-5BSG (single switch)                 - $80.00

#L39-5BDG (dual switches)              - $145.00

#L39-5BTG (shown at right)             - $210.00

#L39-5B4G (full 4-door kit, 7 sw’s)  - $425.00

#L39-5B4GX (4-door kit, 4 switches in a row   

  in 1 panel, for console)                   - $250.00

#L39-5B2/2GX (4-door kit, 4 switches in

  1 panel, 2-over-2 for console)         - $250.00

#L39-5BTGB20 (shown at right)  3-switches 

  plus mech./cable latch release       - $350.00

Oval Frames:

#L39-5BOSG (single switch)              - $90.00

#L39-5BODG (dual switches)           - $155.00

#L39-5BOTG (shown at right)          - $230.00

#L39-5BTG     - $210.00

#L39-5BOTG     - $230.00

#L39-5BTGB20     - $350.00

Flush Mount Amber Front Light and Red Marker Light in a Great New Size

The amber light (top, at left) has 12 super bright amber LED’s that are split 4-4-4 so that it can be used as a single solid light or as both turn & park or with additional parts for Sequential Signal or Alternate Light Flashing (see #L90, below).

#L89A (amber LED’s, pair)                - $125.00

The red light (bottom photo) has 15 super bright red LED’s.  #L89R (red LED’s, pair)  - $125.00

Both lights have clear lenses (4-1/4” long, 1/2” wide, 1/2” deep for sanding) with diffuser, dual intensity convertors, installation hardware and instructions. Parts for Alternate Light Flashing or Sequencing sold separately.

Alternate Light Flashing (ALF) Modules 

Make any two lights flash alternately (wig-wag) from just the input of a standard flasher. Works with LED’s or incandescent or one of each. Perfect for our #L89A (above) to make each light flash 8 LED’s/4 LED’s alternately. Or use with a turn signal and side marker like many newer cars. 3 amp max. load per light. Two modules (one for each side) with connectors and instructions.

#L90 (as shown)                           - $90.00

Flush Mount LED Taillight with Red Taillight/Brake and Sequential Amber Turn Signals

15% Brighter!

How do you make the best Billet Pedestal 3rd Brake Light even better??? Make it even brighter! And we did. Our wonderful 3rd brake light is now 15% brighter - and still with built-in turn signal. 60 super bright red LED’s behind a clear lens with diffuser.

#L61C  Ya‘ gotta love it!     - $190.00

While other companies are trying their hardest to catch up with us, we just keep raising the bar. Buy the BEST -

Watson’s StreetWorks of course!

How about our Small Billet Pedestal???.

Of course!  30 super bright red LED’s behind a clear lens with diffuser. Also 15% brighter.

#L61SMC                                    - $160.00

Another Neat Way to Mount a Single

L75 Series Switch 

Our L75 switches fit perfectly inside our L47N ignition switch nut for a neat decorative look. It secures with the switch nut. L75 switch sold separately. 

#L47N     (Billet Nut with O-ring)                              - $12.00

Larger L75 Series Momentary Switch 

Big fingers? No problem. These 22mm switches will work with our Hot Dot All-in-One Starter Switch or any other momentary switching function. Available with blue or white LED illumination. Fits into 7/8” diameter hole, overall diameter just under 1”.  

#L75-22SMB/W   (mom., blue or white LED)     - $25.00

Combine our Gemini, 2-function Remote Control, our Hot Dot All-in-One Ignition Start/Stop and this Interface Relay for the ultimate in looks and security for only $265.00 combined. That’s LESS THAN ANY OTHER SIMILAR SYSTEM available anywhere!

Billet Bullet Nobs and

Neat Nob Latch Release Kits 

We’ve made the greatest looking Bullet Billet Nobs! Use them as switch dress-up nobs, grill decoration or in our Neat Nob Latch Releases.

The nob itself is 3/4” diameter X 1-3/16” long.

#B14AN Dress-up Nobs (10-32, 3/16”, 1/4”,1/4-20 thread, shown far right)   - $12.00 ea.

With 1/4-20 stud and hardware  - $17.00 ea.

Neat Nob Release Kits:

#B14FMA  (top photo)                     - $80.00

Other Neat Nob Release Kits also available are Round Trim, Oval Trim, Thin Oval Trim or Square Trim, all 2-door kits for Gator Jaw type latches - $60.00

Chrome Push Button Switches 

They’re back! We were able to find a new supplier for these very popular switches. We now have them in either Round or Square shape and both On/Off and Momentary action.

#L10RM/P (Round Mom. or On/Off) - $12.95 ea.

#L10SM/P (Sq. Mom. or On/Off)  - $12.95 ea.

And Switch Panels, Too! Just tell us what you want to switch and we can do it.

2, 3, 4, 5, 6, 7 and 8 switch panels with or without LED indicators. Panels start at $60.00 and usually include any relays needed to do the job. Give us a call, today!

Slightly larger than our #L86 3-LED lights for more light and even more uses.

Brake Light Flasher

You ask - we deliver. This easy to install flasher makes your 3rd brake light flash for 5 seconds when applied then come on solid. Get their attention without blinding them. It starts the flashing over again when you reapply the brakes.

#AM-03                                                                     -  $40.00

What a great build-in flush mount LED taillight. It has 40 Bright Red LED’s in each light that are dual intensity for both taillights and brake lights plus 12 bright amber LED’s that will sequence 4-4-4 for the turn signals. Clear build-in lenses with diffusers are 15-1/4” long X 1/2” wide, sequencing modules, LED flasher and mounting hardware.              

#L58RACL-SEQ                                                                           - $325.00 (pair)

Latch release switches and custom panels are also available in both rectangular and oval design.